乙烯基吡啶-偏二氯乙烯共聚物的合成与表征

以过氧化二苯甲酰（BPO）为引发剂,以羟乙基纤维素（HEC）为分散剂,采用悬浮聚合方法合成了乙烯基吡啶-偏二氯乙烯共聚物,然后采用特性粘数、UV、FT-IR、1H-NMR、DSC、TG等测试手段研究了乙烯基吡啶-偏二氯乙烯共聚物的结构和性能。     

超临界水中NaCl无限稀释扩散系数的研究

The molecular dynamics(MD) was employed to simulate the diffusion coefficient of sodium chloride at infinite dilution in supercritical water from 703.2K to 763.2K and from 30 MPa to 45 MPa ,Based on the simulated data and the Patel-Teja(PT) equation of state and the Liu-Ruckenstein equation,an equation for calculating the diffusion coefficient of NaCl at infinite dilution in supercritical water is proposed,Both the agreement between the simulated and correlated data,and that between the simulated and predicted data of diffusion coefficients for NaCl in supercritical water ranging from 703.2K to 803.2K and from 25 MPa to 50MPa show that this equation is applicable for calculation of diffusion coefficients.     

Electrochemistry at capped platinum nanoparticle Langmuir Blodgett films: A study of the influence of platinum amount and of number of LB layers

Platinum nanoparticles (n-Pt), over-grafted with 2-thiophenecarbonyl chloride are assembled on gold electrodes, by the Langmuir Blodgett (LB) technique using behenic acid (BHA) as promoting agent. These layers are electrochemically active without any preliminary activation. The [Fe(CN)₆]^3−/4− redox couple was used as electrochemical probe. This paper reports on the influence of the number of deposited LB layers, and the n-Pt density on the electrochemical response. n-Pt density was modified by the change of the “BHA/n-Pt” ratio. Cyclic voltammograms of “[Fe(CN)₆]^3−/4−” were observed whatever the coating conditions. As soon as the first layer was deposited the electrochemical response was associated to the n-Pt coverage, its response slightly increased up to a steady state for five or seven layers. As expected, the increase of the Pt density favored the increase of the current density. XPS analysis performed before and after electrochemical cycling showed that 4-mercaptoaniline capped platinum nanoparticles, and their over grafting were chemically and electrochemically stable. Analysis of influence of the number or the n-Pt density of the layers showed that the electrochemically active part of LB electrodes was provided by the last layer plus a part of the underlying one.     

PVC塑料制品中增塑剂PAEs在水环境中迁移规律的研究

本文应用固相萃、取液相色谱联用技术,研究了PVC塑料制品中有机增塑剂在水环境中的迁移规律。研究表明在PVC塑料制品中的增塑剂会在水环境中缓慢释放,并且受pH、温度等影响较大。     

以氧化镁和氧化锌为主稳定剂的PVC的热稳定性和力学性能

用HAAKE流变仪研究了氧化镁／氧化锌稳定体系对聚氯乙烯的动态热稳定性能。结果发现，在氧化镁／氧化锌质量比为2／3的条件下，配合环氧大豆油、硬脂酸钙、无毒亚磷酸酯和有机稳定剂作为辅助稳定剂，其初期着色和热稳定效果都超过了市售钙锌稳定体系，流变性能和动态热稳定特性接近铅盐稳定体系。用这种稳定体系稳定的PVC的力学性能与市售钙锌稳定体系稳定的相当。     

废紫铜催化制备氯化亚铜新工艺

介绍以废紫铜为原料，在催化剂作用下，铜直接同盐酸，空气中氧发生反应制备氯化亚铜的新工艺，试验确定了最佳反应条件，产品质量达到了GB1619－79的标准要求，该工艺具有原料消耗少，反应速度快，流程短，操作简单，生成成本低等特点。     

3,5-二氯苯甲酸的合成

考察了在以邻氨基苯甲酸为原料，三氯化铁为催化剂，X为溶剂，直接通氯氯化，再经重氮化合物3，5－二氯苯甲酸的工艺过程中，物料配比，反应湿度等反应条件对收率的影响，确定了合成的适宜条件，通过此合成工艺，产品的收率可达85％以上。     

4-甲基苯磺酰氯的合成

以甲苯为原料，经过磺化、酰氯化反应合成4-甲基苯磺酰氯。该工艺与传统合成工艺相比，具有原料消耗低，产品收率高，纯度高，选择性高，成本低等优点，具有广阔的工业化应用前景。     

由氯化钙制备纳米碳酸钙研究

随着国民经济的发展,对纳米碳酸钙的需求量越来越大.基于化工生产中大量副产氯化钙,以氯化钙和碳酸铵为原料,对制备纳米碳酸钙进行了研究.实验研究了添加剂、反应温度和反应物浓度等工艺条件对产物粒径的影响,并采用XRD和TEM对产物进行了初步分析.实验结果表明:不同的添加剂对产物粒径以及形貌具有一定的影响,当氯化钙和碳酸铵配料比为1.0:1.0 mol/mol、反应温度为15℃和氯化钙浓度为0.3 mol/L时,以有机醇A和磷酸系化合物G为添加剂制备的产物为方解石型球状碳酸钙,粒径在50 nm左右.     

氯化氢废气的回收及治理

在原有氯化氢废气回收方法的基础上，提出了降膜吸收氯化氢废气的新方法，并取得了良好效果，环境污染也明显减少。